Thank you for choosing Nuvico products.

Please review the following information before updating your Nuvico Hydra series recorder.

*Version R4569 Release Warning*

Upon updating to R4569 (or beyond) from an older firmware, the hard drive of the recorder must be formatted.  This is due to the new dual-stream capability of recording.  It is required that you perform a backup of any needed video before the update is performed.  After the update to R4569 has been completed, future firmware updates will not require the hard drive to be formatted.



[Version R4569 Release Notes]

    5MP Camera support
            HR-400 supports 1 5MP camera, assigned to channel 1.
            HR-800 supports 2 5MP cameras, assigned to channels 1 and 2.
            HR-1600 supports 4 5MP cameras, assigned to channels 1-4.
        Additional configuration required when using the AC-TR100 (see below).

    VGA output is now capable of acting as a spot output, with single and quad view modes.

    Dual-stream available for both live and playback.
        Live
            Single channel displays 720P.
            Multi-channel (8+) displays D1 (720x480).
        Playback
            Single channel displays 1080P.
            Multi-channel displays D1 (720x480).

[Note]

5MP cameras using the AC-TR100 for video over RG-59 to a Hydra recorder will need to have the IP address changed from 192.168.30.220 to 172.16.0.***.  This additional setup is not required if the AC-TR100 is not being used.